Town of Loving, New Mexico Water Tower Overflow Upgrades
February 2016
Project Description: Marine Diving Solutions provided fabrication, installation, and rehabilitation services for a 200KG water tower.
Services included:
Services included:
- Shop prepping of 140' of 12' schedule 40 pipe with coating
- Installation of 140' of 12' pipe in the field.
Town of Simla, Colorado Tank Rehabilitations
May 2016
Project Description: Marine Diving Solutions provided fabrication, installation, and replacement services for 3 water tanks ranging from 44KG to 250KG.
Services included:
Services included:
- Concrete foundation repairs
- Replacement of outdated barn hatches with 24' AWWA compliant type
- Installation of a frost proof vents
- Replacement of level indicators
- Lowering overflows to ground level on each of the tanks
Board of Water Works of Pueblo Colorado La Vista Tanks Roof Drainage Improvements
May 2015
Project description: Marine Diving Solutions provided drainage, ventilation and safety improvements to two 3MG water tanks.
Services Included:
Services Included:
- Fabrication and installation of a wire safety fall arrest systems
- Fabrication and installation of frost proof vents
- Installation of vents
- Fabrication of numerous custom aluminum components
- Installation of upgraded overflows
- 50% of all work was completed using man lifts and suspended activities
Town of Hugo, Colorado Water Tower Rehabilitation
June 2016
Project Description: Marine Diving Solutions provided fabrication, installation, and rehabilitation services for a 100KG water tower.
Services included:
Services included:
- Weld repairs to the wall panel to roof panels to seal gap to meet AWWA code
- Replacement of outdated barn hatch with a 24' AWWA compliant one
- Installation of a frost proof vent
Heron, NM Blast and Re-coat
April 2015
Project Description: Marine Diving Solutions provided an interior and exterior blast and recoat to a 150KG water tank.
Services included:
Services included:
- Interior blast and recoat to an SSPC SP10
- Exterior blast and recoat to an SSPC SP6
- Installation of a frost proof vent.
Department of Veteran Affairs Water Tower Rehabilitation
October 2014
Project Description: Marine Diving Solutions provided fabrication, installation, and removal services for a 100KG water tower from the 1940's.
Services included:
Services included:
- Fabrication and installation of a ladder for the exterior of the water tank with a wire safety fall arrest systems
- Fabrication and installation of a ladder for the interior of the water tank with a wire safety fall arrest systems
- Installation of two 30' and one 24' manways
- Repair of cracks and spalling in the structural foundation of the tank
- Welding of base anchor bolts and nuts
- Replacement of roof access hatch and vent
- Raising of 6' inlet and 8' outlet pipes 150' to the interior of the water tank
- Sealing top of riser to tank to make wet riser into a dry riser
- Installation of a 5' overflow 150' with splash pad and security flapper valve
- Raising of handrail to meet current OSHA compliance
- Welding of the circumference of the post head to shell connections
- Installing a handrail at the top of the tank for safety of personnel
- Replacing of access hatch for entry into the tank from the top of the tank
- 75% of all work was completed using man lifts and suspended activities
Town of Red Cliff, Colorado Water Tank Insulation Replacement and Upgrades
October 2014
Project Description: Marine Diving Solutions provided fabrication, installation, and removal services for a 250KG water tank from the 1960's.
Services included:
Services included:
- Fabrication and installation of a ladder on the exterior of the water tank with a wire rope safety fall arrest systems
- Removal of failing foam
- Installation of Foamglass foam insulation
- Raising roof panels back into place that had failed due to severe snow fall
- Installation of custom supports for reinforcing roof panels
- Installation of a 3' wide X 15' long platform / catwalk on top of the tank
- Removal and replacement of existing vent with a new 24' frost proof vent with extended neck for severe winter months
- Installation of aluminum jacketing to protect Foamglass foam insulation
- Cleaning and inspection to the interior of the water tank
Swans Nest Metro District Ice Protection Upgrades
September 2014
Project Description: Marine Diving Solutions provided fabrication, installation, and removal services for a 300KG water tank.
Services included:
Services included:
- Installation of electrical lines to provide power to a water tank that was approximately 1 mile up a mountain from the closest power source
- Coating repairs to the inside of the water tank at water level due to ice damage
- Installation of a PAX water mixer to prevent ice damage.
Town of Fleming, Colorado Water Tower Rehabilitation
April 2014
Project Description: Marine Diving Solutions provided fabrication, installation, and rehabilitation services for a 75KG water tower.
Services included:
Services included:
- Fabrication and installation of a ladder on the exterior of the water tank with landing platforms and wire safety fall arrest systems
- Fabrication and installation of a ladder on the interior of the water tank • Guardrail fabrication and installation on the roof of the water tank
- Removal of a broken 8' by 120' vertical riser pipe removal
- Foundation excavation for a new pipe placement
- Concrete forming and foundation for a new 8' diameter by 130' vertical freestanding ductile iron pipe placement
- Concrete forming and foundation for a new 8' diameter by 130' vertical freestanding ductile iron pipe
- Backfilling and compaction around piping (10' deep)
- Installation of 120' vertical ductile iron pipe
- Fabrication and installation of custom flange to the base of the water tank
- Removal of existing side supports for vertical riser
- Installation of new supports for vertical riser pipe
- Epoxy repairs to corrosion areas due to use on interior of the water tower
Rueter-Hess Reservoir Improvements
Project Description: Marine Diving Solutions provided diving and drilling operations to successfully installed a debris containment log boom giving the intake structure and gates protection from vegetation, logs and loose debris.
Services include:
Read More...
Services include:
- Core drilling 10, six foot holes into the face of the dam to secure 2 sides of the debris containment log boom.
- Diving to depths up to 120 feet to strategically place 17, 12,000 lbs. anchor blocks in two separate grid locations.
- MDS assembled the log boom and ran over 700 feet of 1 ½ wire cable to tie it all together.
  
    
    Chatfield Dewatering
Project description: Marine Diving Solutions De-Watered over 5,000,000 gallons of water to clean, make repairs, and get a detailed in-depth inspection for the army corps of engineers.
Services included:
Read More...
Services included:
- Marine Diving used multiple pumps in order to de-water the stilling basin.
- Power washed and scrubbed the walls clean of all built up marine growth and heavy staining.
- MDS used crane operation to install 2 ladders and to clear large debris such as rocks and logs from the stilling basin.
Steamboat Lake Intake Pipe Expansion
Project description: Marine Diving Solutions assisted in the expansion and drilling operations of a 10 inch expansion pipe from 50 feet underwater to the shore.
Services included:
Read More...
Services included:
- Diving and utilizing a marine silt curtain to contain silt, debris and disturbed sediment.
- Drilling over 800 feet and locating the end of the drill head.
- Then attaching the pipe to the drill head to pull the 10 inch pipe back through.
- Finally cutting the pipe and safely floating the extra back to shore.
Categories